Home > Products > NDI Optical Tracker > PRO CMM Optical Tracker

PRO CMM Optical Tracker

       Improve your shop-floor metrology results with this portable optical tracker that provides the highest accuracy and largest measurement volume of any system in its class.

PRO CMM Overview

       NDI’s PRO CMM delivers accurate, reliable 3D measurements using a high-speed Optical Tracker, flexible Multi-Sided Probe and powerful Dynamic Part Referencing. With high-accuracy (up to 20µm) over a large measurement volume (up to 35m3), the PRO CMM is the ideal optical CMM for portable measurement anywhere on the shop floor.

        At the core of the PRO CMM system is a real-time Optical Tracker using the principles of modern high-speed photogrammetry. The PRO CMM can measure parts up to 7.5m in a single setup with micron level accuracy throughout the measurement volume. This optical CMM is designed specifically to deliver accurate, reliable dimensional metrology anywhere on your shop floor. It has no moving parts, making the PRO CMM a reliable and  proven optical CMM, even outside the stable environment of a controlled quality lab.

Dynamic Part Referencing (DPR)

       The ability to automatically reference and re-reference the measurement system into part coordinates is unique to optical tracking technology. With DPR, an operator can simultaneously move the part, fixture, probe or scanner, even the Optical Tracker itself, and the system will maintain an accurate alignment. Unwanted motion is continuously measured and subtracted, without operator intervention. DPR can also 

 

Multi-Sided Probe (MSP)

 

       Each Multi-Sided Probe is factory characterized to ensure accurate measurement regardless of probe orientation. When attached to a pre-calibrated Renishaw tip, you can easily probe visible or hidden features anywhere within the PRO CMM measurement volume. Optionally, you can attach the MSP to a separately supplied scanner (see ScanTRAK option) or mount it as a rigid body for 6DOF tracking (see PRO CMM with DMM option).

 

PRO CMM Applications

       The accuracy and portable metrology provided by the PRO CMM makes it an obvious choice for many applications, including part-to-cad inspection, reverse engineering , fixture verification, deformation analysis, door and closure testing, structural testing, and robot measurement and guidance.

NDI products are used to solve many application challenges in industries, including Aerospace, Automotive, Heavy Industry, Foundries, and Academic Research.

 

Pro CMM Optical Tracker

       At the core of the PRO CMM system is a real-time Optical Tracker which uses the principles of modern high-speed photogrammetry.

       The PRO CMM can measure parts up to 6m in a single setup with micron level accuracy throughout the measurement volume.

       This portable CMM is designed specifically to deliver accurate, reliable dimensional metrology anywhere on your shop floor. It has no moving parts, making the PRO CMM a proven performer even outside the stable environment of a controlled quality lab.

Dimensions: 1157 mm x 230 mm x 175 mm

Weight: 24 kg

Power Input: 100 – 240 VAC, 50/60 Hz, 1.0A

Operating Temperature: 10°C to 35°C

 

Measurement

Model 1000

Model 2000

Model 3500

Measurement Volume

1.5 to 4.5m (10m³)

1.5 to 6m (20m³)

1.5 to 7.5m (35m³)

Single Point Accuracy

up to 20μm

up to 20μm

up to 20μm

Volumetric Accuracy

80μm + 2.5L/100

80μm + 2.5L/100

80μm + 2.5L/100

Application Accuracy

up to 35μm

up to 35μm

up to 35μm

Target Resolution ( at 2.5 m)

up to 2μm

up to 35μm

up to 35μm

Targets (3D)

 up to 512

Rigid Bodies (6DOF)

 up to 170

Sampling Speed (targets/sec.)

 up to 4500 Hz

Latency

 up to 5 ms

ScanTRAK - 3D Laser Scanner

       Add the power of 3D scanning to the PRO CMM with the ScanTRAK handheld laser scanner. With ScanTRAK you are free to move the scanner to any orientation without beam break issues or mechanical restrictions. An unlimited range of motion ensures efficient part coverage, while dramatically improving operator 

       productivity. Use ScanTRAK to perform non-contact scanning of complex surface details for inspection and reverse engineering.

PRO CMM with DMM

       Offers you the option of adding DMM high-speed, real-time motion tracking to your PRO CMM. With industry leading measurement speed and accuracy, PRO CMM with DMM helps you visualize, record and analyze individual point 3DOF motion or true 6DOF position of rigid bodies. Position, displacement, deformation, and frequency response can be quantified for a wide variety of applications including: boat tank tracking, wind tunnel tests, airfoil deflection, lift and drag, door, hood, trunk, or rear hatch closure, suspension testing, and any other motion analysis of mechanical structures.

 

MultiTRAK - Multiple Tracker Volume Extension

        Add the MultiTRAK option to the PRO CMM system to support two or more Optical Trackers within a single measurement volume. Optimize the number and position of Optical Trackers yourself, or leverage the expertise of NDI’s design team to customize your measurement solution. Whether designed with fix mounted or portable Optical Trackers, MultiTRAK cells increase productivity by enlarging the measurement volume to surround large parts with a single setup. Probes, scanners, or tracking targets move seamlessly through the unified measurement volume using a single software measurement plan.

 

 

 COPYRIGHT 2015 © Ningbo Fred three-dimensional technology co., LTD
《The law of the People's Republic of China telecom and information services business license》 number: 16943267 zhejiang ICP for RSWL to provide technical support