如何通过逆向工程的方法获得一个离水面高8米的齿轮的数据？
Actiris350 使之成为可能; all the acquisitions have been made in an unusual place in order to recreate a specific part in 3D.

系统安装
The sensor has been fixed on a metallic post and has been connected to a laptop; it is as simple as that. Few meters away hanging at 8 meters above the water, the operator can measure the gear thanks to the wireless probe.

带给操作者最大的灵活性
在测量机与测头之间没有任何实物的连接，意味着为操作者提供了更大的移动自由度。

• Only Actiris350 is able to manage this type of unusual measurement.

A measuring arm or a laser tracker needs stability and Metris Krypton is too heavy and needs wires everywhere to get a dynamic referential.

动态参考系
Thanks to the 3 reflectors placed on the part, measurements are carried out with ease and without loss of precision.

结果
After setting the measurement process, the operator was able to get data from the part.
The acquisition of curves and points was necessary to reconstruct the gear (theoretically uniform and wrecked).

Then a CAD surface reconstruction – IGES format - using data from the acquisition was performed.

ActiCM

122, rue du Rocher-de-Lorzier – F 38430 Moirans – www.acticm.com
Tél. +33 4 76 91 37 60 – Fax +33 4 76 35 00 07
Sales contact: a.mendesnazare@acticm.com
Technical contact: srobert@acticm.com